QT10-15B typenon-burning brick making machineby the loader will sand, stones and other raw materials intoIn the hopper of the PLD1200 batching machine, the electronic meter measures the batching according to the formula stored in the computer (it can also be adjusted randomly). After the measurement, the material is sent to the JS750 mixer lifting hopper by the conveyor, and then the material is sent to the mixer silo by the lifting hopper.

Cement, fly ash, etc. are also sent by the screw conveyor to the cement and fly ash metering device on the mixer at the same time, and then directly sent into the mixing chamber, and then water is also metered into the mixing chamber according to the design amount of water cement ratio for mixing. After stirring for about 3 minutes, the mixed materials are sent to the storage hopper of the QT10-15B block forming machine by the 8-meter belt conveyor for storage. Then, the material is sent to the top of the mold by the forming machine distributing car, and the material is forcibly fed into the mold box by centrifugal force generated by the rotation of the distributing shaft. After the distribution is completed, the material car returns to the rear position, the pressure head drops and the vibrator starts to work to vibrate and pressurize the material. After the molding, the mold box lifts and extrudes the product. Then the product is pushed to the brick feeder, then it is transferred to the maintenance room by forklift for maintenance.

detailed parameters:

1. machine dimensions: 9350*2320*29500mm

2. Rated pressure: 21MPa

3. Main vibration form: Taiwan vibration

4. Vibration frequency: 2800-4500 times/min

5. pallet size: 1100*900mm

6. molding cycle: 15-25 seconds/time

7. Total power: 44.58KW